SENUO filtration technology (Tianjin) Co., Ltd ,which is in China, is a company to manufacture and market products in the field of membrane separation.SN-UF-1060N is one of SENUOFIL series membrane products,which was listed in the following table.
Specification
Type | SN-UF-1060N |
Dimension(mm) | Φ250×1874 |
material | H-PES |
Filtration Mode | Inside-out |
Inner/external size(mm | 0.8 / 1.40 |
MWCO | 6KDa , 20KDa , 65KDa , 150KDa; |
Membrane area(m2) | 60 |
Housing material | UPVC, ABS |
Potting material | Epoxy resin, Polyurethane |
End material | UPVC, ABS |
Inlet size (mm) | DN50 |
Performance
Design water production rate(m3/h) | 3.0-6.0 |
Maximum inlet pressure(MPa) | 0.3 |
Maximum operating temperature(ºC) | 50 |
pH | 2-13 |
The turbidity of production water (NTU) | <0.1 |
The removal efficiency of pathogen | >6log |
The removal efficiency of E.coli | >6log |
SDI | <3 |
Test condition | 0.1MPa,25ºC |
*If operating temperature is over 60ºC, the membrane modules should be ordered. *Design water production rate depends on raw water quality. |
Application:
- Water treatment: groundwater, tap water, degerming in surface water, turbidity removal, purification; pretreatment of reverse osmosis.
- Wastewater treatment and reuse: oilfield reinjection water, municipal sewage, industrial waste water, hospital wastewater.
- Desalination and the pretreatment of desalination.
- Biotechnology and medical technology: separating and refining extracts of Chinese medical, removing pyrogen in water for injection, separation and purification of biological products, blood purification.
- Food & beverage: clarification of fruit juice and liquor.